WIRELESS GAS DETECTORS
There are many uses for wireless gas detectors in the scientific and technical industries A wireless gas sensor are normally used to determine the component gases in automobile exhaust so as to measure the effectiveness of pollution control devices but uses the latest technology to eliminate cumbersome installation while giving the most precise readings possible.
After the wireless gas detectors have been put into operation, the owner-operator shall select the worst condition time for verification. The ACME representative shall come to the site at the specified time to verify the installation of the wireless gas detectors and readjust the operating set points up or down according to conditions specific to the area served by the system. A report shall be given to the engineers.
The UniSet E1 CO detector is the most economical unit produced by Acme for the enclosed vehicular spaces. These wireless gas detectors can cover up to 10,000 sq. ft. of clear, open space. They are designed to operate one-speed fans using a single dry contact that can be set to close at 35 or 100 PPM, user adjustable. It also includes visual indicators on the front of the unit for 35 and 100 PPM CO, sensor trouble indication and an audible alarm that can be set to go off at either level. Factory settings are relay contact at 35 PPM CO and alarm at 100 PPM CO. The UniSet E1 includes temperature compensation and is its enclosure is constructed of heavy, damage-resistant PVC with vandal-proof screws. These wireless gas detectors are available with integral standard or remote optional sensor heads. This is the ideal unit for your small garage project where you need reliable detection with a minimum of controls.
While typically used for enclosed vehicular facilities where CO and NO2 for Diesel fumes are the gases detected, the wireless gas detectors can also be configured to monitor CO2, Propane, Methane, Gasoline Vapors and other toxics and combustibles, please consult the factory. The wireless gas detectors can cover up to 10,000 sq. ft. each depending on the layout of the space.
|wireless gas detectors|infrared gas detection|acme engineering products ltd|wireless gas detection|
|
